Cambo USA -
Cambo USA -
Home
Blog
Register
Dealers
Events
EDU
Downloads
Contact Us
  • Home
  • Blog
  • Register
  • Dealers
  • Events
  • EDU
  • Downloads
  • Contact Us
Actar, Cambo Actus, Cambo Wide RS, New Release, XT

Cambo Introduces 2 New Lenses

Cambo WRE-2019 for Cambo WRS and Phase One XT cameras. 19mm f/4. WRS-1600 Phase One IQ4 150

Cambo WRE-2019

The optical part probably looks familiar enough. Cambo has taken the highly acclaimed Nikkor PC 4.0/19 and made it available for use on Cambo WRS and Phase One XT cameras. The lens has been rehoused and fitted with a controller for the electronic aperture. The image circle is large enough to cover the sensor of an IQ3/IQ4 digital back and still permit about 4mm of shift. The edge-to-edge sharpness is excellent and would make this wide angle lens the perfect addition to your workflow.

Cambo WRE-2019 for Cambo WRS and Phase One XT cameras. 19mm f/4.
Cambo WRE-2019 for Cambo WRS and Phase One XT cameras. 19mm f/4.
Cambo WRE-2019 for Cambo WRS and Phase One XT cameras. 19mm f/4. WRS-1600 Phase One IQ4 150, PCF Geared Head

Cambo ACTAR-20, Actus

Cambo ACTAR-20


The ACTAR-20 is the latest addition to the extensive line of Cambo lenses available for use on the Actus view cameras. The distortion of this new lens is very low and the optical quality meets the requirements of the latest generation of Mirrorless Cameras. The ability to use filters was greatly missed on both the ACTAR-15 and ACTAR-19, but the new ACTAR-20 features an 82mm filter thread which allows for their use with this wide angle lens.

Pre-orders will be delivered in March 2023.

February 13, 2023by CamboUSA
FacebookTwitterPinterestGoogle +Stumbleupon
Cambo, News, Phase One, XT

Installing the WRX-1003 Tripod Mounting Block on the XT Camera

WRX-1003

The WRX-1003 is an ARCA compatible Tripod Mounting Block for the Phase One XT Camera. This adapter allows you to mount the Compendium from the bottom of the XT Camera. Before the introduction of this adapter you would have to remove the metal panel on the side of the camera to mount a compendium tot the XT. The WRX-1003 comes with 16.5cm support rods. Its also is available in the WRX-1002, which also includes a compendium. Below is a short instructional video that explains the easy installation.


December 23, 2021by CamboUSA
FacebookTwitterPinterestGoogle +Stumbleupon
Cambo, Phase One, XT

WRX-1001 Coldshoe Corner Piece for the XT Camera

The WRX-1001 is a dedicated adapter for the Phase One XT camera body. This adds an Accessory Shoe to the corner of the XT body. It replaces the original corner piece and mounts easily with 1 (hidden) screw. Below is a short instructional video that explains the installation.

June 17, 2021by CamboUSA
FacebookTwitterPinterestGoogle +Stumbleupon

Recent Posts

  • Cambo Introduces 2 New Lenses
  • Introducing the Smart Controller
  • Stepping Up
  • ACTUS-MV
  • Great Flavors & Wonderful Scenery

Categories

“Cambo BV was founded in The Netherlands in 1946 and has the distinction of being the first studio camera manufacturer to produce an all-metal large format camera. Based in the town of Kampen in the East of the Netherlands, Cambo has since built a reputation for high quality, precision engineered cameras, stands and other studio equipment.”

© 2019 copyright Cambo USA // All rights reserved