Here’s a quick look at the new products Cambo introduced in 2020.
![](https://www.cambousa.com/wp-content/uploads/2020/10/WRS-1600_XT-lens-panel_02c-1-1024x797.jpg)
The X-Shutter is an electronic leaf shutter that can replace the traditional #0 copal shutter on several Schneider and Rodenstock lenses. The X-Shutter is only controlled by Phase One’s IQ4 infinity platform. Some of your existing lens panels with a Rodenstock or Schneider lens can be remounted with tis new X-Shutter. Cambo will start delivery of Cambo WRS lens panels – with or without Tilt/Swing mechanism – featured with the X-Shutter by default.
![](https://www.cambousa.com/wp-content/uploads/2020/10/Actar-19_01w-1024x1024.jpg)
The ACTAR-19 is an Ultra Wide Angle Lens, dedicated to the Cambo Actus system in combination with a DSLR or Mirrorless camera, mounted to the Actus.
![](https://www.cambousa.com/wp-content/uploads/2020/10/WRS-HVSA_02w-1024x1024.jpg)
The WRS-HVSA lensplate allows you to mount lenses from the Hasselblad-500 series, in combination with the WRS series camera and the PhaseOne XT and adds extra functionality for the lens’ leaf shutter to be activated and released.
![](https://www.cambousa.com/wp-content/uploads/2020/10/WRS-HVSA_Sonnar_w-1-1024x892.jpg)
WRC-HVSA Kit WRC-400 with WRS-HVSA
The WRC-HVSA Kit comprises the WRC-400 camera body, the new WRS-HVSA lenspanel, the SLW-80 interface for Hasselblad-V interface, as well as a wooden handgrip. (Lens not included)
WRS-SERV
The WRS-SERV is a new service that sends your WRS-1000, 1200, 1600, 5000 series or the WRC-400 back to the Cambo Headquarters for a modification and over all service check. The modification machines a groove into the body of the camera that allows for XT lens panels to be used on your WRS or WRC bodies.
![](https://www.cambousa.com/wp-content/uploads/2020/10/WRS-1049w-1.jpg)
The WRS-1049 Front-Adapter can replace the WRS-1048 in combination with Cambo WRS Short Barrel Lens Panels. Now you can use a Cambo WRS Short Barrel on the Phase One XT body, as the XT body doesn’t accept rear spacers.
![](https://www.cambousa.com/wp-content/uploads/2020/10/WRS-M645_02w.jpg)
The WRS-M645 lensplate allows you to mount lenses from the Mamiya-645 series, in combination with the WRS series camera. (Lens not included.)
![](https://www.cambousa.com/wp-content/uploads/2020/10/PCF_01_w-1024x1024.jpg)
Not introduced in 2020 but Cambo’s PCF tripod head has amazing flexibility. It can tilt, swing, rotate as if it were a ball head, and it has precision gears for fine-tuned tilt and swing and additional geared rotation of the top platform. All geared movements are self-locking and available in any position of the head. After leveling, the top rotation can be used for panoramic shooting.