Cambo USA -
Cambo USA -
Home
Blog
Register
Dealers
Events
EDU
Downloads
Contact Us
  • Home
  • Blog
  • Register
  • Dealers
  • Events
  • EDU
  • Downloads
  • Contact Us
Cambo, News

Cambo’s New Products for 2020

Here’s a quick look at the new products Cambo introduced in 2020.


X-Shutter

The X-Shutter is an electronic leaf shutter that can replace the traditional #0 copal shutter on several Schneider and Rodenstock lenses. The X-Shutter is only controlled by Phase One’s IQ4 infinity platform. Some of your existing lens panels with a Rodenstock or Schneider lens can be remounted with tis new X-Shutter. Cambo will start delivery of Cambo WRS lens panels – with or without Tilt/Swing mechanism – featured with the X-Shutter by default.


ACTAR-19

The ACTAR-19 is an Ultra Wide Angle Lens, dedicated to the Cambo Actus system in combination with a DSLR or Mirrorless camera, mounted to the Actus.


WRS-HVSA

The WRS-HVSA lensplate allows you to mount lenses from the Hasselblad-500 series, in combination with the WRS series camera and the PhaseOne XT and adds extra functionality for the lens’ leaf shutter to be activated and released.


WRC-HVSA Kit WRC-400 with WRS-HVSA

The WRC-HVSA Kit comprises the WRC-400 camera body, the new WRS-HVSA lenspanel, the SLW-80 interface for Hasselblad-V interface, as well as a wooden handgrip. (Lens not included)


WRS-SERV

The WRS-SERV is a new service that sends your WRS-1000, 1200, 1600, 5000 series or the WRC-400 back to the Cambo Headquarters for a modification and over all service check. The modification machines a groove into the body of the camera that allows for XT lens panels to be used on your WRS or WRC bodies.


WRS-1049

The WRS-1049 Front-Adapter can replace the WRS-1048 in combination with Cambo WRS Short Barrel Lens Panels. Now you can use a Cambo WRS Short Barrel on the Phase One XT body, as the XT body doesn’t accept rear spacers.


WRS-M645

The WRS-M645 lensplate allows you to mount lenses from the Mamiya-645 series, in combination with the WRS series camera. (Lens not included.)


PCF Gearhead

Not introduced in 2020 but Cambo’s PCF tripod head has amazing flexibility. It can tilt, swing, rotate as if it were a ball head, and it has precision gears for fine-tuned tilt and swing and additional geared rotation of the top platform. All geared movements are self-locking and available in any position of the head. After leveling, the top rotation can be used for panoramic shooting.


October 20, 2020by CamboUSA
FacebookTwitterPinterestGoogle +Stumbleupon
Accessory, Cambo Studio, News, Studio Equipment, Tripod Head

PCM and PCF – Cambo Precision Camera Tripod Heads

Building off the success of the PCH (Precision Control Head) launched in 2017, we are excited to announce the following two upcoming new members of the Cambo PC (Precision Control) tripod head family:

A Cambo WRS-1600 Camera mounted onto a Cambo PCH Precision Controlled Gearhead.
The original Cambo PCH (Precision Control Gearhead) in action.

The Cambo PCM tripod head combines the best parts of the PCH, in a more affordable “entry level” head, that has features far past it’s class.

The PCM (Precision Control Manual) is an entry level version of the PCH head which removes the internal gearing system while maintaining a sturdy and easy to position camera support body. 

If you want the ultimate in control the Cambo PCF provides a fully geared experience across the board.

The PCF (Precision Control Full) builds on the existing PCH geared body, but adds additional geared controls to the 360º rotating platform on the top of the unit. 


The whole Cambo Precision Control Family:
PCF, PCH, PCM

The new PC heads will launch alongside a newly offered QR-8 quick release plate with a 3/8″ screw (vs the standard QR-7 plate with 1/4″ screw). Both plates are based on the Arca standard and are interchangeable depending on your camera mount type.

A Cambo QR-7 Quick Release tripod plate with 1/4" camera stud.
Cambo QR-7 Quick Release Plate

Available for order today from any of our Cambo USA dealer locations.

June 24, 2019by CamboUSA
FacebookTwitterPinterestGoogle +Stumbleupon

Recent Posts

  • Cambo Introduces 2 New Lenses
  • Introducing the Smart Controller
  • Stepping Up
  • ACTUS-MV
  • Great Flavors & Wonderful Scenery

Categories

“Cambo BV was founded in The Netherlands in 1946 and has the distinction of being the first studio camera manufacturer to produce an all-metal large format camera. Based in the town of Kampen in the East of the Netherlands, Cambo has since built a reputation for high quality, precision engineered cameras, stands and other studio equipment.”

© 2019 copyright Cambo USA // All rights reserved